Accessories

21 CFR part 11 package for Elemental Analyzers

Additional software package for elemental analysis in accordance with FDA regulations.

21 CFR part 11 package for UDK169-159

Software package upgrade for UDK 159 or 169 distillation units for compliant nitrogen determination according to FDA regulations.

Acid pump kit UDK129 115V

Acid pump for the determination of alcohol, volatile acids and phenols.

$704.50

Acid pump kit UDK1X9 230V

Acid pump for the determination of sulfites and volatile acids.

Alcoholic strength kit

Kit for alcoholic strength determination with steam distillation containing a clamp for the closing of the NaOH tube and a 500 ml Kjeldahl balloon for the distillation of the sample.

$162.50

Anhydrone, 454g

Chemical desiccant for the final water absorption trap before nitrogen detection.

$167.00

Antisplash bell

VELP Antisplash Bell is an essential accessory designed to reduce splashing and evaporative losses during heating processes in laboratory glassware. It provides effective protection by creating a barrier, preventing hazardous substances from escaping.

Barcode scanner with USB socket

Improve data management and efficiency in the lab.

$205.50

Beaker high shape 400 ml

Borosilicate glass 3.3 high shape beaker without spout.

$27.50

Boiling stones, 30g

Boiling stones, used to promote uniform boiling and prevent bumping during solvent extraction processes. Suitable for ensuring consistent and efficient sample processing.

$37.00

Butyl seal SER148, 3pcs/box

Durable and chemical-resistant Butyl seals, designed for use with the SER 148 extraction unit, ensuring a secure and reliable seal during solvent extraction processes.

$71.00

Celite 545, 1 Kg

During the hydrolysis step, Celite 545 is used to form a stable layer within the glass crucible (typically 3 g), serving as a barrier to keep the hydrolyzed sample and prevent any loss during the filtration process.

$207.00

Cellulose thimbles 40x80mm, 25pcs/box

Ideal for processing a sample with low fat content by using a high amount of sample

$206.00

Cellulose thimbles 25x80mm, 25pcs/box

Ideal for processing a sample with high fat content by using a low amount of sample though saving solvent

$180.50

Cellulose thimbles 33x80mm, 25pcs/box

Standard-size cellulose thimbles designed for efficient and reliable filtration during solvent extraction processes. Ideal for quantitative extractions, they are compatible with a wide range of solvents and ensure optimal performance in analytical procedures.

$142.50

Ceramic ash collector with bottom

Universally applicable and disposable ash collector in ceramic.

$51.00

Cleaning kit for metallic ash collector

Kit for cleaning metallic ash collectors, reusable up to 5-6 times.

$135.50

Closing device tin foil cup

A reliable tool for securely sealing tin foil cups, ideal for contamination-free sample preparation in elemental analysis.

$677.00

COD test tubes Ø 42x200 mm, 200 ml with cone NS 29/32, 3 pcs/box

Test tubes specifically designed for COD (Chemical Oxygen Demand) analysis in laboratories handling wastewater samples. With a 200 ml capacity and a standard NS 29/32 cone, they ensure secure sealing and reliable performance during testing.

$143.00

Complete Glass bottle solvent collection

A durable glass bottle for the safe and efficient collection of solvents during extraction processes.

$302.00

Condensation kit for water samples

It includes a 3.5-liter tank with a condenser to condense the evaporated liquid during TKN analysis and collect it automatically, preventing the need for operator intervention.

Copper oxide, 50g

Copper oxide to be added in the top part of the reduction reactor along with Vcopper^TM for the reduction of the nitrogen oxides to elemental nitrogen.

$29.50

Crucible holder HU6 for SER 148

Holder for securely supporting HU6 crucibles in the extraction cups during the solvent extraction process.

$149.00

Crucible holder HU6 for SER 158

Holder for securely supporting HU6 crucibles in the extraction cups during the solvent extraction process.

$228.00

Crucible P1 for HU6, 6pcs/box

P1 crucibles with a nominal pore size of 100–160 μm, designed to collect hydrolyzed samples at the end of the hydrolysis step. After drying, the crucible can be seamlessly transferred to the VELP Solvent Extractors, minimizing handling and eliminating the risk of sample loss.

$616.00

Crucible P3 for HU6, 6pcs/box

P3 crucibles with a nominal pore size of 6-40 μm, designed to collect hydrolyzed samples at the end of the hydrolysis step. After drying, the crucible can be seamlessly transferred to the VELP Solvent Extractors, minimizing handling and eliminating the risk of sample loss.

$622.00

Disc 1 for capsules for autosampler

30-position disc for capsules for liquids or semi-solid samples (expandable with an additional disc A00000420 – up to 59 samples).

Disc 2 for autosampler

30-position disc for tin foils for any kind of samples (expandable with additional discs A00000200 and A00000201 – up to 117 samples).

$591.00

Disc 2 for capsules for autosampler

30-position disc for capsules for liquids or semi-solid samples (to be used in combination with disc A00000390).

Disc 3 for autosampler

30-position disc for tin foils for any kind of samples (expandable with an additional disc A00000201 – up to 117 samples).

$591.00

Disc 4 for autosampler

30-position disc for tin foils for any kind of samples (up to 117 samples).

$591.00

EDTA Certified, 100 gr

Carbon and Nitrogen standard to create and check calibration curves of Elemental Analyzers.

$255.50

Extraction cup L Ø 65x120mm 3pcs/box

Large extraction cup designed for processing samples with low-fat content. It ensures efficient extraction, delivering reliable and consistent results for applications involving larger sample volumes.

$657.00

Extraction cup S Ø 48x120mm 3pcs/box

Small extraction cup designed for processing samples with high-fat content. It allows for efficient extraction using small sample amounts, providing reliable and consistent results for applications that require precise and controlled extractions.

$657.00

Extraction cup STD aluminium 3pcs/box

Robust extraction cap in aluminum, mainly used in quantitative analyses.

$601.50

Extraction cup STD Ø 56x120mm 3pcs/box

Standard extraction cup designed for both quantitative and qualitative analyses, perfect for processing samples with medium fat content. It enables efficient extraction with a moderate sample quantity, ensuring reliable and consistent results in most applications.

$611.50

Extraction cup, 6pcs/box

Glass extraction cups for the SER 148 Solvent Extractor, designed to perform both quantitative and qualitative analyses.

$708.00

Extraction thimbles holder Ø25 mm

Holder for securely supporting Ø25 mm extraction thimbles in the extraction cups during the solvent extraction process.

$250.50

Extraction thimbles holder Ø33 mm

Holder for securely supporting Ø33 mm extraction thimbles in the extraction cups during the solvent extraction process.

$128.50

Extraction thimbles holder Ø40 mm

Holder for securely supporting Ø40 mm extraction thimbles in the extraction cups during the solvent extraction process.

$210.00

Filter for actived carbon

Third optional stage to remove the last traces of sulphur dioxide by a filter with granulated activated filter

$51.50

Floating balls

$310.50

Fluorine Absorber, 15g

Designed to protect the reactor of the EMA 502 Elemental Analyzer when handling fluorine-containing samples, enhancing reactor longevity without altering catalyst activity.

$336.00

GC column for CHNS 2m PTFE

$1,792.50

GC column for oxygen SS 1m

$906.50

Glass bottle for waste collection

This accessory is recommended for collecting the filtrate. For the analysis of 6 samples order 2 bottles.

$423.50

Glass cap

Durable and heat-resistant glass cup for Kjeldahl digestion unit.

$42.00

Glass crucible P0, 6pcs/box

P0 glass crucible with pore size 160-250 micron.

$341.50

Glass crucible P1, 6pcs/box

P1 glass crucible with pore size 100-160 microns.

$364.00

Glass crucible P2, 6pcs/box

P2 glass crucible with pore size 40-100 micron.

$335.00

Glass crucibles P3, 6pcs/box

P3 glass crucible with pore size 16-40 microns.

$319.00

Glass fiber thimbles 25x80mm, 25pcs/box

Used for qualitative analyses. These thimbles are ideal for processing samples with high-fat content, utilizing a small amount of samples for accurate and efficient results.

$362.50

Glass fiber thimbles 33x80mm, 25pcs/box

Used for qualitative analyses. These thimbles are ideal for processing samples with medium fat content, utilizing a moderate amount of samples for accurate and efficient results.

$407.00

Glass fiber thimbles 40x80mm, 25pcs/box

Used in qualitative analyses. These thimbles are ideal for processing samples with low-fat content, utilizing a high amount of samples for accurate and efficient results.

$407.00

Glass sand, 2 Kg

During the hydrolysis step, glass sand is used to form a stable layer within the glass crucible (typically 25 g), serving as a barrier to keep the hydrolyzed sample and prevent any loss during the filtration process.

$52.00

Green viton seal SER158, 3pcs/box

Durable and chemical-resistant Viton seals, designed for use with the SER 158 Automatic Solvent Extractor, ensuring a secure and reliable seal during solvent extraction processes.

$59.00

Grey butyl seal SER158, 3pcs/box

Durable and chemical-resistant Butyl seals, designed for use with the SER 158 Automatic Solvent Extractor, ensuring a secure and reliable seal during solvent extraction processes.

$60.00

H2O tank for UDK or H20 and residue tank for FIWE Advance

H2O tank with the cap with 20l capacity.

$211.50

H3BO3 tank with caps (UDK149,159,169)

H3BO3 tank with the cap with 5l capacity.

$159.50

Handling device extraction cups

Handling device for extraction cups, designed to simplify the process of managing up to 6 extraction cups simultaneously. It ensures easy, secure, and efficient handling during the solvent extraction process.

$333.00

Handling device for extraction cup

Handling device for extraction cups, designed to simplify the process of managing up to 6 extraction cups simultaneously. It ensures easy, secure, and efficient handling during the solvent extraction process.

$122.00

High temperature sealing grease

Grease for application on O-rings, designed to withstand high temperatures. Typically used with Elemental Analyzers and Oxitest.

$28.50

IQ/OQ/PQ EMA 502 Manual

Kit approx. 1000 analysis for CHNS

Consumable kit, containing everything you need to analyze up to 1000 samples (estimated value).

$2,204.00

Kit approx. 1000 analysis for Oxygen

Consumable kit, containing everything you need to analyze up to 1000 samples (estimated value).

$2,956.50

Kit approximately 1000 analyses for NDA - CN

Consumable kit, containing everything you need to analyze up to 1000 samples (estimated value).

$1,350.00

Kit approximately 2000 analyses for NDA - CN

Consumable kit, containing everything you need to analyze up to 2000 samples (estimated value).

$2,160.00

Kit for TOC/sample preparation

Designed to optimize Total Organic Carbon (TOC) analysis, this kit provides all the essential components for the acidification step, ensuring the effective removal of inorganic carbon from samples prior to TOC determination.

$2,680.00

Kjeldahl balloon, 500 ml

The Kjeldahl balloon is used for determining alcoholic strength through steam distillation of alcohol samples such as wine, beer, and spirits.

$99.50

KjTabs VCM Kjeldahl Catalyst Tablets - 1000 pcs/box

KjTabs^TM VCM are universally applicable Kjeldahl Catalyst Tablets with a low copper content. The perfect solutions to speed up the digestion of your samples.

$347.50

KjTabs VCT Kjeldahl Catalyst Tablets - 1000 pcs/box

KjTabs^TM VCT Kjeldahl Catalyst Tablets are ideal for tougher samples. The perfect solutions to speed up the digestion process.

$471.00

KjTabs VKPC Kjeldahl Catalyst Tablets - 1000 pcs/box

KjTabs^TM VKPC Kjeldahl Catalyst Tablets are ideal when a high amount of copper is required. The perfect solutions to speed up the digestion of your samples.

$427.50

KjTabs VS Kjeldahl Antifoam Tablets - 1000 pcs/box

KjTabs^TM VS Antifoam are perfect to reduce foam formation during the initial phase of the mineralization process.

$359.00

KjTabs VST Kjeldahl Catalyst Tablets - 1000 pcs/box

KjTabs^TM VST Kjeldahl Catalyst Tablets are ideal for oily and fatty samples. The perfect solutions to speed up the digestion process.

$387.00

KjTabs VTCT Kjeldahl Catalyst Tablets - 1000 pcs/box

KjTabs^TM VTCT Kjeldahl Catalyst Tablets are ideal for tougher samples. The perfect solutions to speed up the digestion process.

$419.00

KjTabs VW Kjeldahl Catalyst Tablets - 1000 pcs/box

KjTabs^TM VW Kjeldahl Catalyst Tablets are ideal for applications based on the Wieninger method. The perfect solutions to speed up the digestion of your samples.

$733.50

Manual dosing liquids samples kit

Metal reactor tube

Resistant metal reactor tube for VELP Elemental Analyzer. Metal tube is reusable after cleaning, for Combustion.

$581.00

Metallic ash collector

Reusable metallic ash collector ensuring resistance and reducing cost per analysis.

$58.00

Mold for tin foils 50x50mm

Compact mold for tin foil shaping before sample weighing. A proper cup shape ensures the easy closing of the tin foil and avoids potential sample loss, ultimately leading to reliable results.

$215.00

NaOH tank with caps (UDK1X9)

NaOH tank with the cap with 10l capacity.

$164.50

Nickel Carbon wool, 5g

Nickel Carbon wool to be added in the pyrolysis reactor tube for Oxygen analysis.

$282.00

Nickel wool, 2g

Nickel wool to be added in the pyrolysis reactor tube for Oxygen analysis.

$119.00

Oat meal, 30g

Standard for calibration.

$175.00

Pack of 10 refill of actived carbon

A convenient pack of 10 activated carbon refills, ideal for specific applications to efficiently absorb odors during the digestion process.

$82.50

Pierceable septums, pack of 10 pcs

Pincer for weighing cups

For securely handling weighing cups during sample preparation and analysis.

$143.50

Pre-packed CHNS reactor

Pre-packed combustion reactor in quartz containing quartz wool, tungsten oxide and Vcopper^TM. Ready to use.

$281.50

Pre-packed combustion reactor

Pre-packed combustion reactor in quartz containing quartz wool, VELPCatalyst, and inert layer. Ready to use.

$372.00

Pre-packed O reactor

Pre-packed pyrolysis reactor in quartz containing nickel wool, nickel carbon wool and quartz chips. Ready to use.

$558.00

Pre-packed reduction reactor

Pre-packed reduction reactor in quartz containing Vcopper^TM, quartz wool, and copper oxide. Ready to use.

$368.50

PTFE sheath for 29/32 cones

The PTFE sheath for 29/32 cones protects laboratory glassware from chemical corrosion, high temperatures, and physical wear.

$22.50

Quartz ash collector

Universally applicable and disposable ash collector in quartz.

$43.00

Quartz ash collector diam. 13mm

Universally applicable and disposable ash collector in quartz with a diameter of 13mm.

$37.00

Quartz Chips, 50g

Quartz chips to be added in the Pyrolysis reactor along with nickel wool and nickel carbon wool for the reduction of the sample into its elemental compounds.

$130.50

Quartz reactor tube

Quartz reactor tube for VELP Elemental Analyzer ensuring high visibility of consumables consumption. Best for combustion and reduction. Single-use only.

$177.50

Quartz reactor tube diam. 18mm

Quartz reactor tube for VELP CHNS-O Elemental Analyzer ensuring high visibility of consumables consumption. Single-use only.

$122.00

Quartz wool, 50 g

Quartz wool to be added in the combustion and reduction reactor tubes. Required also for the preparation of the final water trap before nitrogen detection.

$266.00

Sample rack DK8-DKL8 test tubes 400ml

Sample rack designed to position 400ml Kjeldahl tubes during the digestion process performed with the DK8 and DKL8 system.

$532.00

Silver foil 35x35 mm, 100 pcs

35x35 mm Silver Foils for TOC determination and halogenated samples.

$273.50

Spacer for test tube Ø48x260 mm

Adapter to accommodate 48x260 mm glass test tubes with a capacity of 300 ml.

$110.50

Sulphanilic acid certified, 5 gr

Standard to create and check calibration curves of CHNS Elemental Analyzers.

$390.00

Super-Absorbent Powder, 10 g

Super-Absorbent Powder is ideal for sample preparation when analyzing liquid samples as it changes the status of the sample to paste and prevents the overflow of liquid from the tin foil cup.

$33.00

Test tube Ø48x260 mm, 300 ml

Test tubes with a wider diameter (48 mm) compared to standard ones, while maintaining the same 300 ml capacity. It can be used with the VELP digestion and distillation units by employing the appropriate accessories (tube connection and spacer).

$56.00

Test tube Ø50x300 mm, 400 ml

400 ml test tubes designed for Kjeldahl analysis, ideal for handling larger liquid volumes with low nitrogen content. These tubes offer increased capacity while maintaining the same 42 mm upper diameter, ensuring compatibility with standard digestion and distillation systems.

$85.50

Test tube Ø80x300 mm, 1000ml

Designed for the separation of hydrocyanic acid from wastewater samples through distillation. With a 1-liter capacity, these test tubes are used to analyze 200 mL of sample, ensuring reliable and accurate results during the process.

$107.00

Test tubes Ø26x300 mm, 100 ml 6pcs/box

Test tubes for Micro-Kjeldahl analysis on small homogeneous samples with high nitrogen/protein content: 10 – 30 mg solid sample, 1 – 3 mL liquid sample.

$254.50

Test tubes Ø42x300 mm, 250 ml 3pcs/box

“Standard test tubes” widely used for nitrogen and protein analysis according to the Kjeldahl method. Depending on the expected nitrogen content, optimal sample amounts are usually in the range of 0.1 to 5 g for solid samples, and up to 200 mL for liquid samples.

$105.00

Thimble weighing cup SER158 and 148

For convenient and secure handling of thimbles while weighing samples on the balance.

$84.50

Thimbles stand (6 places)

Thimbles stand with 6 slots, ideal for securely holding extraction thimbles during sample preparation.

$196.50

Thimbles stand 6 places SER158

Thimbles stand with 6 slots, ideal for securely holding extraction thimbles during sample preparation.

$199.00

Tin capsules 6x18 mm, 100 pcs

Tin capsules, ideal for liquid or semi-solid samples.

Tin capsules 8x20 mm, 100 pcs

Tin capsules, ideal for liquid or semi-solid samples.

Tin Foil Cups, 150 pcs

35x35 mm tin Foils cups with conical-shape, ideal for solid, semi-solid, and liquid samples.

$36.00

Tin Foil Cups, 5x9mm 250 pcs

5x9 mm nitrogen-free Tin Foils with conical shape, ideal for any kind of sample, solid, liquid or semi-solid.

$105.50

Tin foils 50x50 mm, 450 pcs

50x50 mm tin Foils, ideal for high amount of solid, semi-solid and liquid samples.

$112.00

Tube connection Ø26, Ø48

Adapter to accommodate 26 or 48 mm diameter glass test tubes.

$110.50

Tungsten oxide, 25g

Tungsten oxide to be added in the CHNS combustion reactor tube along with quartz wool and Vcopper^TMfor the reduction of the nitrogen oxides to elemental nitrogen.

$75.50

USB Cable 1,8 mt with filter

1.8 m long USB connection cable with filter

$92.50

Vaflon seal for FIWE (Scharrer method)

Durable and resistant Vaflon seals, designed to ensure a secure and reliable seal during analyses with fiber extractors.

$79.50

Vaflon seal SER148, 3pcs/box

Durable and chemical-resistant Vaflon seals designed for use with the SER 148 extraction unit, ensuring a secure and reliable seal during solvent extraction processes.

$356.50

Vanadium pentoxide, 10g

The Vanadium pentoxide (A00000457) permits improved sulfur combustion in particular samples (e.g. soils, lubricants). It has to be added directly to the tin foil with the sample. The amount of this powder depends on the characteristics of the sample: it is suggested to start using 1/3 of the sample weight; then increase the amount if the combustion is not satisfactory.

$355.00

Vcopper High Reduction Efficiency, 470 g

Formulation of highly active copper powder for the reduction of the nitrogen oxides to elemental nitrogen.

$92.00

VELPcatalyst with inert layer, 36 g

Formulation of high efficient catalyst that accelerates the combustion ensuring accuracy and precision.

$190.50

Viton seal SER148, 3pcs/box

Durable and chemical-resistant Viton seals, designed for use with the SER 148 extraction unit, ensuring a secure and reliable seal during solvent extraction processes.

$76.00

Vreceiver TKN Boric Acid Powder Formula with indicators

The innovative VELP solution for the preparation of one liter of boric acid with indicators (Bromocresol Green and Methyl Red). Ease-of-use, safety and standardization for maximum precision and accuracy in Kjeldahl analysis.

$100.00

Water spray device

It allows for washing the columns of the FIWE 3/6. The "umbrella" jet ensures that the liquid is evenly distributed on the walls and collects any residues that have settled on the walls during the digestion phase, thus preventing sample loss during the boiling of reagents (digestion phase).

$263.00